Total Station Battery Wholesale
How hard is it to install a replacement battery by myself?
Self-install is straightforward for most users. About 90% of the survey controllers and compatible laptop replacement battery models we ship use either a slide-latch or a 2 to 4 screw module. Power down the host, release the latch or remove the screws, lift out the old pack, seat the new total station battery, and re-seat the latch. No soldering iron, no firmware flash, and no dealer visit. A printed quick-start sheet ships inside every wholesale box, and a matching video walk-through is linked from the product page.
How do I match the battery to my equipment without buying the wrong one?
Match by three checkpoints in this order: existing battery part number, host model number, and voltage. The existing battery part number is printed on the label of the pack you are replacing. Cross-reference it against the ETESBAY wholesale total station battery listing; if it is on the compatible list, the SKU is correct. The host model number (printed on the survey tool, data collector, or laptop base) confirms form-factor fit. Voltage must match exactly, while capacity in Wh or mAh can run higher for longer runtime. When in doubt, request a sample unit before placing a full wholesale order.
How long does a Grade-A Li-ion replacement battery typically last?
A Grade-A Li-ion total station battery typically delivers 500 to 800 full charge-discharge cycles before capacity drops to 80% of the original rating, which works out to roughly two to four years of normal field or office use. Storage at room temperature, partial-state-of-charge storage during long downtime, and avoiding full-depth discharge all extend cycle life. Our wholesale shipments are date-coded at the cell level so distributors can rotate stock FIFO and avoid handing end users an aged pack.
